_small.jpg) |
- Item: FW250 *NEW*
- Description: Large Breathitt Chert Winged
Drill - "Broken & Glued" Estill County, Kentucky
- Size: 3 1/8 x 1 3/8 inches
|
 |
- Item: FW189 *NEW*
- Description: Outstanding Winged Drill - Dover Chert - found along the Hiwassee River in Meigs County, Tennessee near the Highway 58 Bridge Area by Billy Campbell
- Size: 1 1/16 x 1 1/16 inches
|
_small.jpg) |
- Item: FW185 *NEW*
- Description: Very Large Outstanding Drill - This is a very large Drill that was found in Michigan. From the J. Tormoehlen Collection of Michigan.
- Size: 4 1/8 x 3/4 inches
|
_small.jpg) |
- Item: FW190 *NEW*
- Description: Black Ground Based Drill - This is an Archaic Point Type, probably a Corner Notch that has been reduced to a drill form where the ears have been removed. Made of High Quality Black Dover Chert - found along the Hiwassee River in Meigs County, Tennessee near the Highway 58 Bridge Area by Billy Campbell
- Size: 1 7/8 x 1 3/16 inches
|
_small.jpg) |
- Item: FM141 *NEW*
- Description: Large Fort Ancient Knife or Drill - This large Fort Ancient Drill or knife is made of a Ohio material. I believe it might be Zelenski? chert. It was found in Bourbon County, Kentucky. It has an ancient tip ding.
- Size: 4 1/16 x 1 inches
|
 |
- Item: FW170 *NEW* Boyle Chert !
- Description: Fantastic Boyle Chert Micro Drill - Here is a Fantastic Drill that is made of a beautiful piece of fossilifferous Boyle Chert. It has a needle tip and is SO fine that you will be amazed that it could survive in the ground for hundreds or thousands of years. This fine drill must have been used to drill very small holes. IT was found in Kentucky. Ex- Tom Davis, Ex- Monty & Jewdy Pennington
- Size: 2 7/16 long x 3/4 inches at base
|
 |
- Item: FW162 * NEW *
- Description: Boyle Chert Pencil Drill - This is a beautiful piece of Boyle Chert. This drill was found in Garrard County, Kentucky. It is a pencil type drill that is well made. Ex- Rockwell Durham, Ex- Monty Pennington
- Size: 2 1/16 x 3/8 inches
|
 |
- Item: FA307
- Description: Corner Notched Drill - This is a VERY nice Archaic Corner Notch drill form. It is made of Tan Chert. It was found in Tennessee. Ex- Tom Davis, Ex- Monty Pennington
- Size: 1 3/4 x 1 1/8 inches
|
 |
- Item: FA292
- Description: Archaic Corner Notch Knife - This fine Archaic Corner Notch Drill hails from Darke County, Ohio. This material has been called "KY Flint Ridge". I picked this up several years ago. This knife was about 3 re-sharpenings from being a drill form. This is a GREAT form. This piece is pictured in the NEW Overstreet # 11 on page # 408. Ex- Monty Pennington
- Size: 2 9/16 x 1 11/16 inches
|
 |
- Item: FA429 * NEW * TOM DAVIS COA TWO COA's
- Description: Green Breathitt Chert Paddle Drill - Here is another very nice Drill that is made of green Breathitt County Chert. It has very nice flaking and a nice tip. The overall symmetry is very good. It was found in Shelby County, KY. Comes with Both a Tom Davis COA and a Ken Partain COA. Ex- Willie Palmer, Ex- John Leonard, Ex- Monty & Jewdy Pennington
- Size: 3 3/16 x 1 inch
|
 |
- Item: FW142 Tom Davis G-10 w/COA
- Description: Northeast Lanceolate Drill - Here is a VERY nice drill that was made from a Lanceolate type point or blade. This fine drill was found in New Jersey. It has GREAT symmetry and a very nice tip. It is made from a semi-glossy Black chert. The sides and slightly tapered and the base slightly convex. I do not find any grinding. It has a small bit of soft glue on one side that can be easily removed. This piece is pictured in the NEW Overstreet # 11 on page # 111. It comes with a Tom Davis COA grading it a G-10.
- Size: 2 5/16 x 15/16 inches
|
 |
- Item: FW168 * NEW *
- Description: Garrard County Kentucky Drill - Here is a very nice pencil drill. It is well made and well flaked. There is a touch of color on the tip and the tail. It was found in Garrard County, KY. Ex- Monty Pennington
- Size: 1 7/8 x 3/8 inches
|
 |
- Item: FA408 * NEW *
- Description: Kentucky Sonora Chert "T" Drill - This is a Very Colorful Sonora Chert "T" drill. It is made of Sonora Chert patinated a bluish with an orange/tan stripe from center of base upwards towards the tip. (see photos) The base is well ground, so this may have once been a Big Sandy or other Archaic type. IT was found in Jefferson County, Kentucky.
- Size: 1 15/16 x 1 1/16 inches
|
 |
- Item: FA238
- Description: Fort Payne Chert Paddle Drill - Here is a VERY NICE "paddle base" type drill that is made of a beautiful mottled tan and cream Fort Payne Chert. (see photos) It is well formed with very nice symmetry. It was found in Shelby County, KY.
- Size: 3 x 1 3/16 inches
|
 |
- Item: FA308 * NEW *
- Description: Dover Chert Drill - Here is a VERY nice drill that is made of Dover Chert. It was found in Humphreys County, TN. Ex- Tom Davis, Ex- Monty Pennington
- Size: 2 3/16 x 1 1/8 inches
|
 |
- Item: FA179
- Description: Very Nice Tennessee Drill G-10 - Here is a Fantastic Drill from Hardin County, Tennessee. I am not sure of the name of chert, but have picked it up there along the Tennessee River myself. The sides of the base are lightly ground and the edges of the drill show usage. This is a very nice long thin drill. It was found along the TN River North of the Pickwick Dam. It is a fine drill that would display well in anyone's collection. Ex-Pete Smith, Ex- Monty Pennington
- Size: 2 13/16 x 9/16 inches
|
 |
- Item: FA351 * NEW * Tom Davis G-10 2 COA's
- Description: Horse Creek Chert Drill - This FANTASTIC Horse Creek Chert Drill was found in Alcorn, Mississippi. Drills of this size and quality are hard to come by, ESPECIALLY one made of highly collectible Horse Creek Chert. It is made of Red, White, & Black Horse Creek Chert. It comes with 2 COA's, one from Tom Davis grading it a G-10 and one from Jerry Dickey grading it a G-9. I consider it a 10 all the way. Don't miss adding this one to your collection!
- Size: 3 5/8 x 1 inches
|
 |
- Item: FA258 * NEW * G-10 DAVIS COA
Horse Creek Chert
- Description: Tennessee Horse Creek Chert Drill - Here is a BEAUTIFUL piece of Colorful Material. This fine drill is made of "Highly Collectible" Horse Creek Chert. It was found in Tennessee. You don't see them this colorful often. It was once in the John Duncan Collection. Comes with a Tom Davis COA grading it a G-10. This piece is pictured in the NEW Overstreet # 11 on page # 408. Ex- John Duncan, Ex- Grady Steele
- Size: 2 1/16 x 13/16 inches
|
 |
- Item: FA294 * NEW *
- Description: Corner Notch Drill - Here is a very nice drill form with a great tip. It is made from an exhausted stemmed form. It was found in Rockcastle County, KY. Ex- Monty Pennington
- Size: 2 5/16 x 3/4 inches
|
.jpg)
.jpg)
.jpg)
.jpg)
